版本比较
标识
- 该行被添加。
- 该行被删除。
- 格式已经改变。
在生产系统中使用 LVM 务必要注意 lvm metadata 的备份，曾经在京东的时候发生过虚机用了 lvm 的磁盘系统，然后虚机文件 qcow2 突然坏掉了，想尽了办法也无法恢复，这给我们拉响了警钟啊，使用lvm的时候务必要备份分区信息，否则坏的时候就欲哭无泪了。
缺省在 /etc/lvm/backup/ 目录下是最新的备份，同样历史版本都在 /etc/lvm/archive/ 目录下。
先备份
在开始恢复之前，一定先做个备份
| 代码块 | ||
|---|---|---|
| ||
cp -pr /etc/lvm /etc/lvm_bkp |
然后去看看archive下的备份信息
| 代码块 | ||
|---|---|---|
| ||
ls -l /etc/lvm/archive/vg_storage_00*
-rw-------. 1 root root 13722 Oct 28 23:45 /etc/lvm/archive/vg_storage_00419-1760023262.vg
-rw-------. 1 root root 14571 Oct 28 23:52 /etc/lvm/archive/vg_storage_00420-94024216.vg
...
-rw-------. 1 root root 14749 Nov 23 15:11 /etc/lvm/archive/vg_storage_00676-394223172.vg
-rw-------. 1 root root 14733 Nov 23 15:29 /etc/lvm/archive/vg_storage_00677-187019982.vg
# |
最坏的情形恢复 pv
警告：这一步只能在 VG 无法正常运行的时候再运行！！！
先说最坏的情形，LVM的建立路径是 pv —> vg —> lv，假设连 pv（物理卷都没了）
我们选择最近的备份，/etc/lvm/archive/vg_storage_00677-187019982.vg
| 代码块 | ||
|---|---|---|
| ||
less /etc/lvm/archive/vg_storage_00677-187019982.vg
...
physical_volumes {
pv0 {
id = "BgR0KJ-JClh-T2gS-k6yK-9RGn-B8Ls-LYPQP0"
... |
从里面拿到 pv 的 id ，重建 pv
| 代码块 | ||
|---|---|---|
| ||
pvcreate --uuid "BgR0KJ-JClh-T2gS-k6yK-9RGn-B8Ls-LYPQP0" \
--restorefile /etc/lvm/archive/vg_storage_00677-187019982.vg |
恢复 VG
如果 vg 是正常的，那么就不用做第二步了，直接从备份中恢复即可，先查看一下
| 代码块 | ||
|---|---|---|
| ||
vgcfgrestore --list vg1
File: /etc/lvm/archive/vg1_00000-1238318622.vg
VG name: vg1
Description: Created *before* executing 'vgcreate vg1 /dev/sda6'
Backup Time: Mon Feb 29 10:58:51 2016
File: /etc/lvm/archive/vg1_00001-285796155.vg
VG name: vg1
Description: Created *before* executing 'lvcreate -L 1G -n lv2 vg1'
Backup Time: Mon Feb 29 10:59:23 2016
File: /etc/lvm/archive/vg1_00002-1661997476.vg ---> just before removal of volume (this is the archive we need)
VG name: vg1
Description: Created *before* executing 'lvremove /dev/vg1/lv2'
Backup Time: Mon Feb 29 13:55:08 2016
File: /etc/lvm/backup/vg1
VG name: vg1
Description: Created *after* executing 'lvremove /dev/vg1/lv2'
Backup Time: Mon Feb 29 13:55:08 2016 |
有信息，我们先加 –test 测试一下
| 代码块 | ||
|---|---|---|
| ||
vgcfgrestore vg01 --test -f /etc/lvm/archive/vg_data_00003-586203914.vg
TEST MODE: Metadata will NOT be updated and volumes will not be (de)activated.
Volume group vg01 has active volume: lv001.
WARNING: Found 1 active volume(s) in volume group "vg01".
Restoring VG with active LVs, may cause mismatch with its metadata.
Do you really want to proceed with restore of volume group "vg01", while 1 volume(s) are active? [y/n]: y
Restored volume group vg01. |
没问题，那就继续，真的操作了
| 代码块 | ||
|---|---|---|
| ||
vgcfgrestore vg01 -f /etc/lvm/archive/vg_data_00003-586203914.vg
Volume group vg01 has active volume: lv001.
WARNING: Found 1 active volume(s) in volume group "vg01".
Restoring VG with active LVs, may cause mismatch with its metadata.
Do you really want to proceed with restore of volume group "vg01", while 1 volume(s) are active? [y/n]: y
Restored volume group vg01. |
恢复后进行校验
| 代码块 | ||
|---|---|---|
| ||
# 显示信息
vgdisplay VG1
# 激活
vgchange -ay VG1
# 显示逻辑卷
lvs -a -o +devices
# 重新扫描
lvscan
inactive '/dev/vg1/lv2' [1.00 GiB] inherit ### its in inactive state and make it active to use.
ACTIVE '/dev/vg0/lv1' [1.00 GiB] inherit
# 上面如果有inactive的，重新激活
lvchange -a y /dev/vg1/lv2
# 再显示一次
lvs -a -o +devices
# 再扫描
lvscan
ACTIVE '/dev/vg1/lv2' [1.00 GiB] inherit
ACTIVE '/dev/vg0/lv1' [1.00 GiB] inherit
# mount上测试
mount /dev/vg1/lv2 /lv2
# 看看东西都在不在
ls -lh /lv2 |
备份和恢复的脚本
备份一个 VG 下所有卷，每个卷一个 snapshot
...
快照备份文件。
备份脚本：backup_snapshot_lvm.pl
| 代码块 | ||
|---|---|---|
| ||
#!/usr/bin/perl -w
#
# Run through a particular LVM volume group and perform a snapshot
# and compressed file backup of each volume.
#
# This script is intended for use with backing up complete system
# images of VMs, in addition to data level backups.
#
my $source_lvm_volgroup = 'vg_storage';
my $source_lvm_snapsize = '5G';
my @source_lvm_excludes = ('lv_unwanted', 'lv_tmpfiles');
my $dest_dir='/mnt/backup/snapshots';
foreach $volume (glob("/dev/$source_lvm_volgroup/*"))
{
$volume =~ /\/dev\/$source_lvm_volgroup\/(\S*)$/;
my $volume_short = $1;
if ("$volume_short" ~~ @source_lvm_excludes)
{
# Excluded volume, we skip it
print "[info] Skipping excluded volume $volume_short ($volume)\n";
next;
}
print "[info] Processing volume $volume_short ($volume)\n";
# Snapshot volume
print "[info] Creating snapshot...\n";
system("lvcreate -n ${volume_short}_snapshot --snapshot $volume -L $source_lvm_snapsize");
# Write compressed backup file from snapshot, but only replace existing one once finished
print "[info] Creating compressed snapshot file...\n";
system("dd if=${volume}_snapshot | gzip --fast > $dest_dir/$volume_short.temp.gz");
system("mv $dest_dir/$volume_short.temp.gz $dest_dir/$volume_short.gz");
# Delete snapshot
print "[info] Removing snapshot...\n";
system("lvremove --force ${volume}_snapshot");
print "[info] Volume $volume_short backup completed.\n";
}
print "[info] FINISHED! VolumeGroup backup completed\n";
exit 0; |
恢复的脚本，restore_snapshot_lvm.pl：
| 代码块 | ||
|---|---|---|
| ||
#!/usr/bin/perl -w
#
# Runs through LVM snapshots taken by backup_snapshot_lvm.pl and
# restores them to the LVM volume in question.
#
my $dest_lvm_volgroup = 'vg_storage';
my $source_dir = '/mnt/backup/snapshots';
print "[WARNING] Beginning restore process in 5 SECONDS!!\n";
sleep(5);
foreach $volume (glob("$source_dir/*"))
{
$volume =~ /$source_dir\/(\S*).gz$/;
my $volume_short = $1;
print "[info] Processing volume $volume_short ($volume)\n";
# Just need to decompress & write into LVM volume
system("zcat $source_dir/$volume_short.gz > /dev/$dest_lvm_volgroup/$volume_short");
print "[info] Volume $volume_short restore completed.\n";
}
print "[info] FINISHED! VolumeGroup restore completed\n";
exit 0; |
当然要谨记，这个是块设备级别的备份，最好还是要有另外的数据的备份。
| 目录 |
|---|